Naze32 F3 open-source serial data logger - Micro-module for

This product is a data logger that records data to a memory card via the universal UART serial port. Its operation is similar to that of a black box: it records data from the main device to the serial port and saves it as text to the memory card. This product is compatible with flight controllers equipped with Cleanflight firmware. Simply connect it to the corresponding serial port and configure the Cleanflight software on the host computer to record important drone flight data to the memory card. The flight data logging software performs these recordings. Note: When the memory card is first inserted, it generates a configuration file that modifies the serial port's baud rate. This setting can be changed. Please ensure that the baud rate of the flight controller or main circuit serial port matches that of the recorder. Specifications: Input Voltage: 3.3V to 12V (3.3V to 5V recommended) Memory Format: FAT32, Maximum Capacity: 64GB UART Serial Interface Adjustable Baud Rate Default Bootloader: Pro Mini Atmega328P 5V 16MHz Note: Appearance may vary from batch to batch, without affecting use. Material: Printed Circuit Board Color: Random Note: Random color. Color not selectable. Package Contents: 1 x Serial Data Logger with Pins Only the above-mentioned contents are included; Other products are not included. Note: The color of the item in the photo may slightly differ from the actual product due to lighting and monitor settings. A margin of error of +/- 1 to 3 cm is possible.