X3-Dimming TuYa Intelligent Smart Multifunctional Panel Home Automation

86 In-wall concealed structure, easy installation mode, no need to modify the wall, any match. Self-contained knob design, adjust the light brightness and colour temperature by rotating the knob. Smart Home Connectivity, Profiles, Device Automation, Remote App Control. Compatible with some Graffiti Eco devices. Customise linked scenes to quickly between scene mode and light mode. Function Introduction: 1. Button 1 Open/Close Knob. 2. Button 2 Brightness Colour Temperature ing Key (Backlight white light flashes three times when ing). 3. Button 3, L1 Firewire Control /Scene Button. 4. Button 4, L2 Firewire Control /Scene Button. 5. Knob to adjust light brightness and colour temperature by turning clockwise or anti-clockwise. (Note: This device only supports controlling sub-devices under the same gateway) Functional interface and description: 1. connection 'AC.L' fire wire input 'AC.N' zero wire input. 2. L1 L2 firewire output, respectively connected to the corresponding load firewire (single 500W or less) Installation instructions: To ensure proper use, this product must be installed or removed by a professional electrician. The main of the power supply must be cut off before installing or dismantling this product to prevent electric shock. This product needs to be kept away from fire and water sources during installation and use. This product should not be used in wet environments (Like the bathroom). Instructions for the operation and use of the product 1. Open 'Doodle Intelligence APP', enter the home page, select the upper right corner of the"",Continue to select the upper right corner of the"".Manually add the wired ZigBee gateway or scan the code to bind the intelligent central control gateway, the APP interface will display 'Multi-function central control' or 'wired gateway' after the gateway is successfully bound as shown below: 2. Composite knob dimmer , set to 'network mode' and wait for the gateway to autom